Home Page

Cams

Flywheels

Carburetors

Exhaust

Rods

Crankshafts

Blocks

Engine Building Parts

Pistons

Ignition

Valves

Clutches

Transmission And Rear End Parts

Heads

Misc. Parts

Command Engine Parts

Kohler Command Parts

Chassis

Machine Work

Links

Pulling Pictures

 

We Accept Visa, Master Card and Discover.

 

Lakota Command Engine Parts

Innovators Not Imitators

New Command Performance parts are being

continually developed for this very exciting new

class. Call if there is something you need or desire.

 

 

Command Cast Cam Grind  –  $235.00

        * With your acceptable core 

Cast Cam Core Charge   -   $50.00

Steel Billet Cam Grind  –  $280.00   

        * Steel billet included  

Light Weight Steel Cam Gear  –  $75.00 

        * Can be installed on billet or cast

40 hp Steel Cam Gear  –  $80.00 

        * Replaces plastic gear on stock cam 

        * Use on billet cam

Cam Needle Bearing - $15.00

        * For use with roller cams

Side Cover Bearing and Seal Kit  -  $40.00

Command Solid Lifters  –  $50.00

        * Set of 4

Command Nut Adjustable Push Rods  –  $47.00

        * Set of 4

Economy "Cut To Length" Push Rods  –  $25.00

        * Set of 4

        * .080 Chrome Molly

Lakota Command Roller Cam  -  $625.00

        * Includes tool steel billet

Command Roller Lifters  –  $118.00

        * Set of 4

Command Broached Steel Crank Gear  -  $40.00

        * Replacement for Kohler Cast Crank

        * Replacement for MSC Steel Stroker Crank

Lakota Command Billet Rod  -  $240.00

        * Set of 2

        * 4.495 for Stock Cranks

        * 4.395 for Stroker Cranks

        * New Lengths : 4.585 - 4.635

Command Insert Rod Bearings  –  $48.00

        * For 2 rods

40 hp Command Billet Rod  -  $380.00

        * Set of 2

40 hp Insert Rod Bearings  –  $30.00

        * For 2 rods

JE Pistons Include - Rings Wire Clips - Wrist Pin

 

JE Piston - 1.040 Compression Height - $290.00

        * Set of 2

        * 3.031 - 3.051  -  3.270 - [3.375 - 3.385 requires sleeves]

JE Command Piston Rings  -  $46.00

        * Set of 2

        * 3.031 - 3.051 - 3.270 - 3.375 - 3.385

Command Flanged Cyl. Sleeves  -  $130.00

        * Set of 2

        * 3.270 - 3.347 - 3.375

JE Piston - .950 Compression Height - $413.00

        * Set of 2

        * 25 hp - 3.425 - requires sleeves

 

Kohler Command Ring Sets can be ordered.

Prices at Kohler retail.

 

 

 

 

 

Bolt on 1.6:1 Roller Rocker Set  -  $190.00

        * Do not need spacers

Adjustable Roller Rocker Set  - 1.6:1 - 1.7:1  -  $205.00

        * Will need spacers

Valve Cover Spacer Set - 3/4"  -  $36.00

        * Use with Adj. Roller Rockers 

Valve Cover Bolt Kit - 1 3/4"  -  $3.00

        * Use with spacer set

40 hp Adj. Roller Rocker Set  - 1.6:1  -  $218.00

        * Will need spacers

Kohler 18-25 hp Stock Head  #1  -  $123.00

Kohler 18-25 hp Stock Head  #2  -  $128.00

Alloy Head Stud and Nut Kit  -  $34.00

        * Set of 8

Command Head Set Porting   -    $270.00

        *On your acceptable cores

        *Includes:  Welding, reshape chamber, port and polish, & surface heads

        *Does not Include: valves, guides or seats

Command Head Set Valve Job   -    $70.00 and up

        * Does not Include: valves, guides or seats

Remove & Install Valve Guide   -    $15.00 each

        * Does not Include: guides 

O Ring Command Head Set   -    $25.00

        * Includes Wire

Stainless Steel Valves  –  $100.00

        * Set of 4

        * 7mm - Stk. length - 2  Intake 1.320 & 2 Exhaust 1.170

        * 7mm - .297 longer - 2  Intake 1.320 & 2 Exhaust 1.170

        * 7mm - Stk. length - 2  Intake 1.450 & 2 Exhaust 1.200

        * 7mm - .297 longer - 2  Intake 1.450 & 2 Exhaust 1.200

        * Custom Lengths Available

Titanium Valves  –  $200.00

        * Set of 4

        * 7mm - .297 longer - 2 Intake 1.320 & 2 Exhaust 1.170

        * 7mm - .297 longer - 2 Intake 1.450 & 2 Exhaust 1.200

        * Custom Lengths Available

7mm Bronze Guides  -  $20.00

        * Set of 4

7mm Intake Valve Seal   -   $5.25 each

7mm Valve Keeper  -  $6.00

        * Set of 8

6mm Bronze Guides  -  $22.00

        * Set of 4

6mm Intake Valve Seal   -   $4.00 each

6mm Valve Keeper  -  $6.00

        * Set of 8

Valve Spring & Retainer Set  -  $48.75

        * Set of 4

        * 4500 RPM

Valve Spring & Retainer Set  -  $42.00

        * set of 4

        * Open RPM

Ultra Valve Spring & Retainer Set  -  $90.00

        * Set of 4

        * Double Springs

        * For Roller cams only

Command Copper Head Gaskets  - $46.00

        * Set of 2

        * 18-24 HP - 3.080 bore - 031 - .042 - .062

        * 25 HP - 3.300 bore - .031 - .042 - .062

        * 25 HP - 3.400 - .031 - .042 - .062

40 hp Command Copper Head Gaskets - $52.00

        * Set of 2

Permatex Copper Head Gasket Spray  -  $11.00

 

Note: Install All Copper Head Gaskets with

Permatex Copper Spray

We Accept Visa, Master Card and Discover.