- This cam will pass cam check in stock class.
It is not welded.
- Through
profile testing we increased duration by over 8 degrees
- from the stock 18 hp
cam. Three more HP and two ft. lb. torque.
-
- Cast Kohler Cam Core
Charge - $50.00
- Cam
Shim
- $4.00
-
* .005 or .010
- Cam
Pin
- $12.00
-
* For cast pin thru cams
- Steel
Cam Timing Collar - $45.00
-
* For
on cast cams
- 1”
Steel Cam Timing Collar -
$55.00
* For
on steel billets
-
* Collars produces
more dwell time because the points will be shut longer
-
* No excessive gap. More spark
for the coil
-
- 1.280
Large Base Lifter Set w/ adjusters - $30.00
-
*Stock to 500 lift
- 1.330
Large Base Lifter Set - $56.00
-
* 500 to 600 lift
- 1.500 Lifters -
$100.00
-
* Set
of 2
-
* For with cams above 560
lift
- 1.625
Lifters - $100.00
-
* Set of 2
-
* For
with cams above 560 lift
- 7/16"
Head - 3/8" - 24 Adjuster Set
- $16.00
-
* Set
of 2
-
* Use with 1.280, 1.330, 1.500 lifters
- 1/2"
Head - 3/8" - 24 Adjuster Set - $16.00
-
* Set of 2
-
* Use with offset valves
- 1.500
Light Weight Lifters -
$100.00
-
* Set of 2
-
* For
with cams above 560 lift
- 1.625
Light Weight Lifters -
$100.00
-
* Set of 2
-
* For
with cams above 560 lift
- Bronze
Lifter Bore Bushing
- $21.75
Each
-
* Need to be use with Light
Weight lifter sets
-
.GIF)
