Lakota Kohler Command V-Twin Parts 

Innovators Not Imitators

New Command Performance parts are being 

continually developed for this very exciting new 

class.  Call if there is something you need or desire.

 

Command Cast Cam Grind  –  $235.00  

         * With your acceptable core 

Command Steel Billet Cam Grind  –  $280.00   

        * steel billet included  

Command Light Weight Steel Cam Gear  –  $75.00 

        * can be installed on billet or cast

Command 37 hp Steel Cam Gear  –  $80.00 

        * replaces plastic gear on stock cam or use on billet cam

Cam Needle Bearing  -  $8.00

Side Cover Bearing and Seal Kit  -  $40.00

Command Solid Lifters - set of 4  –  $48.00  

Command Adjustable Push Rods – set of 4  -  $25.00   

        * .080 Chrome Molly  

Lakota Command Roller Cam  -  $625.00

       * includes tool steel billet

Command Roller Lifters - set of 4  –  $105.00

 

Lakota Command Billet Rod - set of 2  -  $240.00  

        * 4.495 for Stock Cranks 

        * 4.395 for Stroker Cranks

Command Insert Rod Bearings - for 2 rods  –  $48.00  

Lakota 37 hp Command Billet Rod - set of 2  -  $380.00

37 hp Command Insert Rod Bearings - for 2 rods  –  $30.00  

 

        JE Pistons Include - Rings Wire Clips - Wrist Pin

JE Piston - 1.040 Compression Height - set of 2 - $290.00  

        * 3.031 - 3.051  -  3.270 - [3.375 - 3.385 requires sleeves] 

JE Command Piston Rings – 2 bore set  -  $44.00

        * Set of 2 - 3.031 - 3.051 - 3.270 - 3.375 - 3.385

Command Flanged Cyl. Sleeves - set of 2  -  $130.00

       * Set of 2  - 3.270 - 3.347 - 3.375

JE Piston - .950 Compression Height - set of 2 - $413.00  

         * 37 hp - 3.425 - requires sleeves

Kohler Command Ring Sets can be ordered - Prices at Kohler retail.

Steel Exhaust Flange Set  -  $18.00

 

Command Steel Billet Crankshaft  -  $700.00

        * 2.640 Stock Stroke

        * 2.840 Stroker - use with JE 1.040 CH Pistons

* 2.940 Stroker - use with JE 1.040 CH Pistons 

Command Broached Steel Crank Gear  –  $40.00  

        * Replacement Gear for Cast or MSC Steel Stroker Cranks 

 

 Kohler Command Re Worked Gas Carb  -  $260.00

        * With your acceptable core 

        * Bore, re-jet, external adjuster, new idle circuit, slide in velocity stack  

Command Carb Core Change  -  $75.00

Command Bolt On Velocity Stack  - $65.00

         * Picks up 2 1/2 hp  

         * For on stock carbs - no machining needed 

Command Intake Adapter   -   $80.00

        * Use on Custom or Kohler 2 Barrel Manifold

        * Use with 1.000 or 1.200 Single Cylinder Carb

Pro Flo 1200 - Re Cast Carb    -    $425.00

        * 1.000 or 1.200 - Alky or Gas

Steel Intake Manifold Flange Set  -  $10.00

Command Two Barrel Carb w/gaskets  -  $254.00

Command Two Barrel Manifold  -  $92.00

Lakota Double Disc 1" Shaft Clutch  -  $420.00

        * Includes:  6 Pin Alum Driver With Bearing

                            1" Drive Shaft

                            Yellow Spring

                            Lakota Heavy Duty Clutch Arm 

                            2 Heavy Duty Bonded Discs

                            3 Piece Steel Pressure Plate Set

                            Thro Out Bearing - Teaser Spring - Spring Spacer Cup

 

Steel 3 1/2" Driver Shaft Coupler  -  $34.00

Command Billet Alum Clutch Hub  -  $40.00

Command Clutch Hub Bolt Set [4]  -  $2.00

Bolt on 1.6:1 Roller Rocker Set  -  $185.00

            * Do not need spacers

Adjustable Roller Rocker Set  - 1.6:1 - 1.7:1  -  $205.00

            * Will need spacers

Valve Cover Spacer Set - 3/4"  -  $36.00

            * Use with Adj. Roller Rockers 

Valve Cover Bolt Kit - 1 3/4"  -  $4.00

            * Use with spacer set

37 hp Adjustable Roller Rocker Set  - 1.6:1  -  $218.00

            * Will need spacers

 

Kohler 18-25 hp Stock Head  #1  -  $103.00

Kohler 18-25 hp Stock Head  #2  -  $108.00

Alloy Head Stud and Nut Kit - Set of 8  -  $34.00

 

Command Re worked Head Set  –  $225.00

         * With your acceptable cores

         * Includes: reshape chamber, port and polish, valve job & surface heads

          *  Does not Include: valves, springs, intake seals, guides or seats 

Stainless Steel Valves - set of 4  –  $100.00

            * 7mm - Stk. length - 2  Intake 1.320 & 2 Exhaust 1.170

            * 7mm - .297 longer - 2  Intake 1.320 & 2 Exhaust 1.170

           *  7mm - .297 longer - 2  Intake 1.450 & 2 Exhaust 1.200

Titanium Valves - set of 4  –  $180.00

           * 7mm - .297 longer - 2 Intake 1.320 & 2 Exhaust 1.170

           * 7mm - .297 longer - 2 Intake 1.450 & 2 Exhaust 1.200

 

7mm Bronze Guides - set of 4  -  $20.00

7mm Intake Valve Seal - each   -   $5.00

7mm Valve Keeper - set of 8  -  $6.00

6mm Bronze Guides - set of 4  -  $22.00

6mm Intake Valve Seal - each   -   $4.00

6mm Valve Keeper - set of 8  -  $6.00

 

Valve Spring & Retainer Set  -  $48.75

           * 4500 RPM - set of 4

Valve Spring & Retainer Set  -  $42.00

          * Open RPM  - set of 4 

Ultra Valve Spring & Retainer Set  -  $90.00

          * Double Springs - set of 4  

          * For Roller cams only

 

Command Copper Head Gaskets - set of 2  - $46.00

            * 18-24 HP - 3.080 bore - 031 - .042 - .062

            * 25 HP - 3.300 bore - .031 - .042 - .062

            * 25 HP - 3.400 - .031 - .042 - .062

 

37hp Command Copper Head Gaskets - set of 2  - $52.00

Permatex Copper Head Gasket Spray  -  $11.00

   Note: Install All Copper Head Gaskets with Permatex Copper Spray

 

Command Adjustable Steel Flywheel   -   $275.00

Command Crank Trigger Steel Flywheel   -   $175.00

37 hp Command Adjustable Steel Flywheel   -   $300.00